The Ellis & Watts Main Disconnect Panel MDP Will Not Power On After Power Outage To Site.
Symptom
The Ellis & Watts Main Disconnect Panel MDP Will Not Power On After Power Outage To Site The FE is unable to power on the Ellis & Watts Main Disconnect Panel (MDP) after a power outage at the site when the power company's transformer on the pole outside the building exploded. Three phase power to the MDP has been restored but the MDP will not power on. The FE detects the odor of something having been burned inside the MDP. The FE is unable to power on the Ellis & Watts Main Disconnect Panel (MDP) after a power outage at the site when the power company's transformer on the pole outside the building exploded. Three phase power to the MDP has been restored but the MDP will not power on. The FE detects the odor of something having been burned inside the MDP.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Component
- Ellis & Watts Main Disconnect Panel Contactor K2, E&W part number J1527-103 Ellis & Watts Main Disconnect Panel Contactor K2, E&W part number J1527-103 Ellis & Watts Main Disconnect Panel Contactor K2, E&W part number J1527-103 Ellis & Watts Main Disconnect Panel Fuse F17, E&W part number SS627-9-A32 F17 (rated 600 Volts 3 Amps, E&W p/n SS627-9-A32) F17 (rated 600 Volts 3 Amps, E&W p/n SS627-9-A32)
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.