GE Healthcare · MRExcite
Unable to Boot ReportCARD 2.0 Workstation due to Pins 4 & 8 Were Bent Over and Touching on Rear of Hard Disk Drive Insid…
Unable to Boot ReportCARD 2.0 Workstation due to Pins 4 & 8 Were Bent Over and Touching on Rear of Hard Disk Drive Inside Computer Chassis.
Symptom
Unable to Boot ReportCARD 2.0 Standalone Workstation due to Input / Output Error This is the dedicated ReportCARD 2.0 standalone workstation, (i.e. it is not the ReportCARD software loaded on the AWW). See Attachment for all details.
Applies to
- Models
- Excite
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.