RRF Data Path Exc Rec Signal Test goes over the allotted time (remaining time goes negative) and reports error 2247144 w…
RRF Data Path Exc Rec Signal Test goes over the allotted time (remaining time goes negative) and reports error 2247144 with an odd frequency used.
Symptom
The RRF Data Path Exc Rec Signal Diagnostic Test goes over the allotted time (remaining time goes negative) and reports error 2247144 with an odd frequency used 39 Mhz. See Long Description The RRF/Data Path/Exc->Rec Signal Test goes over the allotted time (remaining time goes negative) and reports error 2247144 with an odd frequency used: 39Mhz. (See below for the error message). This happens every time we run this diagnostic test, but the customer is having no problems with the system. We have replaced the Exciter, Receiver, UTNS and MUX board with no change to the symptom. SPR MRIhc16261 2247144 The IRF driver function ex_set_rho_dds_freq was called with a bad parameter value. Bad parm = 391942464hz. This is a software error.->
Error message
2247144 The IRF driver function ex_set_rho_dds_freq was called with a bad parameter value. Bad parm = 391942464hz. This is a software error.-> 2247144 The IRF driver function ex_set_rho_dds_freq was called with a bad parameter value. Bad parm = 391942464hz. This is a software error.->
Applies to
- Models
- Excite
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.