Future BRM Gradients 2124499-7 & 2124499-3 have been modified in the region of aluminum support plate attachment (221316…
Future BRM Gradients 2124499-7 & 2124499-3 have been modified in the region of aluminum support plate attachment (2213167-3 & 2213168-3).
Symptom
Future BRM Gradients 2124499-7 & 2124499-3 have been modified in the region of aluminum support plate attachment (2213167-3 & 2213168-3) See Long Description and Attachment. This information is Property of GE Healthcare - For GE Healthcare Service Personnel Only. Disclosure to Third Parties Prohibited. Subject: BRM Gradient 2124499-7 Change to Support Plate Mounting from eight M10 fasteners to four per aluminum support plate. Effectivity: BRM Gradient Coils Shipped after 09 November 2006 Problem Description: Future BRM Gradients 2124499-7 & 2124499-3 have been modified in the region of aluminum support plate attachment (2213167-3 & 2213168-3). Prior to November 2006, eight M10 fasteners were used to attach the aluminum support plates to the gradients, See Figure 1. To simplify the plate attachment and save substantial Milling Machine cycle time in Monterrey, Mexico, the plate attachment was reduced to four hole locations, See Figure 2. The extended slots were simplified to drilled & counter bored holes to increase the FRP support surrounding the fastener locations. (See Attachment for the complete SMILe released 11/10/2006.
Applies to
- Models
- Excite
- Product
- Excite HDx Includes "Excite HDi" system. 14.0 Software only.
- Software
- 14.0 For both Excite HDx and 3T Excite HDx systems.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.