Z2 Supply front panel output to Fluke cable is disconnected or faulty message is being logged.
Symptom
Z2 Supply front panel output to Fluke cable is disconnected or faulty message is being logged. The FE has noticed the error message shown below being logged lately, but there is nothing amiss with the system otherwise. They can see the current readout on the Z2 Supply's Fluke panel, and the current matches what is being commanded, and imaging is okay. 2249624 "Z2 Supply front panel output to Fluke cable is disconnected or faulty" The FE has noticed the error message shown below being logged lately, but there is nothing amiss with the system otherwise. They can see the current readout on the (RRI) Z2 Supply's Fluke panel, and the current matches what is being commanded, and imaging is okay. Tue Mar 27 15:31:29 2007 2249624 KRMR port_mgr PMMain.cc 999 Z2 GEMXserv ERROR The Z2 Supply front panel output to Fluke cable is disconnected or faulty. Z2 current monitoring cannot operate. ** Image quality degradation is possible. **
Error message
2249624 Z2 GEMXserv ERROR The Z2 Supply front panel output to Fluke cable is disconnected or faulty. Z2 current monitoring cannot operate. ** Image quality degradation is possible. ** 2249624 Z2 GEMXserv ERROR The Z2 Supply front panel output to Fluke
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Component
- 5106397 5 Channel Shim Power Supply
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.