GE Healthcare · X-ray R&FAdvantx
Advantx LFX power unit reports Error 4219 No Radiographic Exposure when the exposure button is depressed.
Advantx LFX Error 4219 No Radiographic Exposure
Symptom
Advantx LFX power unit reports Error 4219 No Radiographic Exposure when the exposure button is depressed. Safety Contactor energizes and TIRC Rotor Controller is operating normally. Exposure enable and exposure command signals are present from the ECM to the LFX1A1A5 kV Contactor Board. Signal PRI LED CMND does not go high on the LFX1A1A5 KV Contactor Board. This signal is required to go high to turn on the main SCR Contactor.
Error message
Error 4219 No Radiographic Exposure
Applies to
- Models
- Advantx
- Product
- Advantx LFX
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- ADx-E Advantx-E console displayed a 6C00 Error (Digital Imaging Subsystem error - Error status received in IDC Prep Reply) when the first exposure of detector bad pixel calibration was attempted; cali…
- ADXE RFX/SFX Legacy popping noises during angulation SN 3715
- Advantx Rad Compax 40E system with SG100 Tilting Vertical Bucky Stand.
- Advantx Legacy system with DRS 3.2 with DRS Gateway.
- Digital Rad Error 6D00 on Advantx-E console.
- Advantx Erratic shutter operation Adjust motor and gear for proper mesh