GE Healthcare · X-ray VascularInnova
INX100, LCD monitor calibration using Simple Calibration mode on Innova system with Simple Calibration SW.
Symptom
INX100, LCD monitor calibration using Simple Calibration mode on Innova system with Simple Calibration SW. Check Choose Programs → Calibration → Monitor → Display Board Calibration menu item. LCD monitor calibration using Simple Calibration mode on Innova system with Simple Calibration SW, without Dome board calibration. LCD monitor calibration using Simple Calibration mode on Innova system with Simple Calibration SW
Error message
Fluoro and record images have low contrast, blacks are gray and whites are ok. Hard seeing the image in the heart wall area. Looking for more blacks with a brighter background
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.