Advantx Consoles Starting at serial number 221894WK9 have displays which may turn on slowly at initial system…
Advantx Consoles Service Note 3161.
Symptom
Advantx Consoles Starting at serial number 221894WK9 have displays which may turn on slowly at initial system bootup, after the system has been off for 12 or more hours. Operators will experience a slow time, maximum of two minutes, but once the Console is on it will operate normally. Initial turn-on time is determined by the off time, i.e. the longer it is off the more likely it will turn on slowly at power up. If this becomes a customer issue the following solutions are offered.
Applies to
- Models
- Advantx
- Product
- Advantx
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- ADx-E Advantx-E console displayed a 6C00 Error (Digital Imaging Subsystem error - Error status received in IDC Prep Reply) when the first exposure of detector bad pixel calibration was attempted; cali…
- ADXE RFX/SFX Legacy popping noises during angulation SN 3715
- Advantx Rad Compax 40E system with SG100 Tilting Vertical Bucky Stand.
- Advantx Legacy system with DRS 3.2 with DRS Gateway.
- Digital Rad Error 6D00 on Advantx-E console.
- Advantx Erratic shutter operation Adjust motor and gear for proper mesh