Advantx - There is a performance problem that might occur on early production units of the Advantx Console Tou…
Advantx Console Touch Screen, Ambient Light Level Problem.
Symptom
Advantx - There is a performance problem that might occur on early production units of the Advantx Console Touch Screen Frame. This problem is typically seen when the ambient light conditions are changed after the Console is powered-up. Under these conditions, the Console may appear to lock-up, with no system response when the display is touched. (To confirm that this is the problem, reset the Console CPU Board when it stops responding to touch input. This will force the touch frame to re-calibrate itself for the new Ambient Light conditions.)
Applies to
- Models
- Advantx
- Product
- Advantx
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- ADx-E Advantx-E console displayed a 6C00 Error (Digital Imaging Subsystem error - Error status received in IDC Prep Reply) when the first exposure of detector bad pixel calibration was attempted; cali…
- ADXE RFX/SFX Legacy popping noises during angulation SN 3715
- Advantx Rad Compax 40E system with SG100 Tilting Vertical Bucky Stand.
- Advantx Legacy system with DRS 3.2 with DRS Gateway.
- Digital Rad Error 6D00 on Advantx-E console.
- Advantx Erratic shutter operation Adjust motor and gear for proper mesh