GE Healthcare · X-ray VascularInnova50105
Innova No Gantry Motion emergency backout will not drive No Gantry Axis' will drive.
Innova No Gantry Motion emergency backout will not drive
Symptom
Innova No Gantry Motion emergency backout will not drive No Gantry Axis' will drive. The emergency backout will not drive the Detector Lift, and the Manual L arm clutch will not release the Clutch to manually position the L arm.
Error message
error Code = 50105, error Text = POS SMA: Extra course switch engaged or 24V failure, debug Text += pos-error=4AB6, recovery Class /= WR, major Function /= VAS / POS: HW code 0000 = LARM 0001 = Pivot 0002 = ARC 0003 = Lift System impact: From Hard Down to Error logging issue. Displayed message : "Limit switch engaged; please call Service" HW code 0000 = LARM 0001 = Pivot 0002 = ARC 0003 = Lift
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.