Tube Collision detection error.

Symptom

Error message

error Code = 1050306, error Text = TUBE BUMP SENSOR PROBLEM, debug Text = - TUBE COLLISION DETECTION PROBLEM during MP_DiagnosticBumpers (T:0x4AB5 H:0x10 U:0x2), recovery Class = WR, major Function /= GantryAxis System impact: Full gantry motion. Aborts Bolus and 3D acquisition. Displayed message : "Tube collision detection error. Continue with care or call Service." Or since Unity M4 : "Tube collision sensor error. Press Tube front plate to re-init." System impact: Full gantry motion. Aborts Bolus and 3D acquisition. Displayed message : "Tube collision detection error. Continue with care or call Service." Or since Unity 3D M4 : "Tube collision sensor error. Press Tube front plate to re-init."

Applies to

Models

Innova

Product

Innova 2000 Innova 2000 systems Innova 2000 systems Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

Positioner Gantry Positioner Gantry Positioner Gantry

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.