GE Healthcare · X-ray VascularInnova1050098
Innova No Gantry Motion emergency backout will not drive No Gantry Axis' will drive.
Innova No Gantry Motion
Symptom
Innova No Gantry Motion emergency backout will not drive No Gantry Axis' will drive. The emergency backout will not drive the Detector Lift, and the Manual L arm clutch will not release the Clutch to manually position the L arm.
Error message
1050098 Pivot AXIS MCB INTERNAL Debug: H bridge problem (prd:C4) Pivot axis MCB internal error 1050098 Pivot Axis MCB Internal / Debug - H bridge problem (prd: C4)
Applies to
- Models
- Innova
- Product
- X Innova 4100 X Do not use---------4100 systems 4100 systems
- Software
- Innova 4100 M3B+ DL Applications version 3.35.2 Sw. Ver. Ghost DL-2 18.4 DL 3.35.2 DL Atlas Core 3.1O RTAC Atlas Core 3.1O-1 IDC 1.14.22 Calypso 4.28 Calypso uptime 4.26 Positioner 1.12.13 Jedi X623
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.