GE Healthcare · MRExcite22627012262724
MC Power Supply output too low
Symptom
Unable to scan Phased Array Shoulder Coil due to PA Bias Short errors on Profile5. Getting PA Bias 2262724 errors intermittently in APS on site PA Shoulder protocol 3-plane loc. Going into MPS and adjusting TG allows the scan to continue. When TG=60, failure occurs. When TG adjusted manually in MPS to 90-126, scans ok. Happens on PA Shoulder large & small cups.
Error message
2262701 Pre amplifier is not ready. 2262701 NSP APS:aps_pass1 276 Pre amplifier is not ready. 2262724 Phased Array bias error(short) is occurred 2262724 NSP SCP:CoilIdSrpHWO 538 Phased Array bias error(short) is occurred.
Applies to
- Models
- Excite
- Product
- Profile with Excite
- Software
- Profile5 Applies to Profile5 (Excite) only. Profile5 is 12.x based software, not ProfileHD.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.