Ramp and Shim Power Supply Cables are being removed from Forward Production of Signa HDe 1.5T Systems
Symptom
Ramp and Shim Power Supply Cables are being removed from Forward Production of Signa HDe 1.5T Systems See Resolution concept for the complete SMILe released January 10, 2007. Effectivity: All Signa HDe 1.5T System. Problem: If the existing field Ramp or Shim kits (part numbers 2353394 and 2135558 respectively) do not contain the power supply cable (part number 46-320460G1), the power supply cable will need to be added to the existing kits (This is the power cable from the PDU to the Power Supply). See Resolution concept for the complete SMILe released January 10, 2007. Effectivity: All Signa HDe 1.5T System. Problem: If the existing field Ramp or Shim kits (part numbers 2353394 and 2135558 respectively) do not contain the power supply cable (part number 46-320460G1), the power supply cable will need to be added to the existing kits (This is the power cable from the PDU to the Power Supply).
Applies to
- Models
- Excite, Signa
- Product
- Excite HDe. For Hino HDe 14.0 and HDe 15.0 Software Systems only
- Software
- HDe 14.0 For Hino Excite HDe 14.0 systems only.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.