In the Probe/SV Calibration and SNR Tests procedure the specification listed for Probe-P SNR is incorrect.
Symptom
In the Probe/SV Calibration and SNR Tests procedure the specification listed for Probe-P SNR is incorrect. See Resolution concept for the complete SMILe released December 6, 2006. Subject: PROBE-P SNR Specification for EXCITE, HD, and HDx is incorrect. Effectivity: All 10.x, 11.x (EXCITE), 12.x (HD), and 14.x (HDx) 1.5T and 3.0T Signa MR systems equipped with PROBE-P. Problem Description: In the Probe/SV Calibration and SNR Tests procedure the specification listed for Probe-P SNR is incorrect. This was was reported in PQRs 13090212 & 13090211. See Resolution concept for the complete SMILe released December 6, 2006. Subject: PROBE-P SNR Specification for EXCITE, HD, and HDx is incorrect. Effectivity: All 10.x, 11.x (EXCITE), 12.x (HD), and 14.x (HDx) 1.5T and 3.0T Signa MR systems equipped with PROBE-P. Problem Description: In the Probe/SV Calibration and SNR Tests procedure the specification listed for Probe-P SNR is incorrect. This was was reported in PQRs 13090212 & 13090211.
Applies to
- Models
- Excite, Signa
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.