3D Calibration out of Date
Symptom
3D Calibration out of Date: 3D calibration is due in the next 15 days The 3D calibration procedure needs to be performed. At Unity Level it takes around an hour, with Innova CT it can take up to 2 hours. Make sure the sytsem has been on long enough to be stable. If the cal goes past due, it will not inhibit the customer from doing a 3D, however that is not recommended. The 3D calibration procedure needs to be performed. At Unity Level it takes around an hour, with Innova CT it can take up to 2 hours. Make sure the system has been on long enough to be stable. If the cal goes past due, it will not inhibit the customer from doing a 3D, however that is not recommended.
Error message
error Code = 810031, error Text = 3D calibration required before 15 days, debug Text = ADVISORY: The 3D calibration will expire soon., recovery Class = WR, major Function /=XRDataMgr System impact: None. Displayed message : "3D calibration out of date. Perform 3D calibration or Call Service.".
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.