GE Healthcare · MRExcite2261237
TPS or MGD Reset Fails With MDS Link Errors
Symptom
TPS or MGD Reset Fails With MDS Link Errors
Error message
2261237 The ASC NB IF Board was detected but is not configured in MRconfig.cfg. 2261237 MR2_50 NSP SCP:CanAutoConfig 2632 The ASC NB IF Board was detected but is not configured in MRconfig.cfg. Set usssType=yes in MRconfig.cfg, verify that the RF Amp cabling is connected to the ASC NB IF Board, and perform a TPS Reset.
Applies to
- Models
- Excite
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.