GE Healthcare · MRExcite224028022402642248664
Will Not Scan with Gradient Errors
Symptom
Will Not Scan with Gradient Errors.
Error message
2240280 Z Axis Gradient Amplifier Fault 2240280 NSP SCP:GradientScaMdsHWO 1201 Z Axis Gradient Amplifier Fault. IPG received an unknown status 0x14 from the Gradient Subsystem. Verify no errors are reported on the front of the System Control Assembly. Possible causes: MDS link or faulty amplifier bus ribbon cable. 2240264 Y Axis Gradient Amplifier Fault. 2240264 NSP SCP:GradientScaMdsHWO 1201 Y Axis Gradient Amplifier Fault. IPG received an unknown status 0x14 from the Gradient Subsystem. Verify no errors are reported on the front of the System Control Assembly. Possible causes: MDS link or faulty amplifier bus ribbon cable. 2248664 - MDS link failure. An MDS device failed to respond to SCP Mon Feb 2 13:27:26 2004 2248664 1 MR-OC0 NSP SCP:MdsLinkHWO 1395 MDS link failure. An MDS device failed to respond to SCP. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. MDS timer: 0x0025 Transmitted header: 0x10 Gradient Transmitted opcode: 0x02 EN 335
Applies to
- Models
- Excite
- Product
- Profile with Excite
- Software
- Profile5 Applies to Profile5 (Excite) only. Profile5 is 12.x based software, not ProfileHD.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.