GE Healthcare · MRExcite
MRIQ Low Signal in Diffusion beginning and end of series Images Due to No Short Term Eddy Currents
Symptom
MRIQ Low Signal in Diffusion beginning and end of series Images See attached image. Loss of signal in beginning and end images of series in Diffusion scan sequence. Several images have little or no signal. see attachment. If you display images in 3D or IVI mode , you can clearly see the bands in the S and I direction.
Error message
Short term constant values are zero FAIL No short linear eddy current compensation is applied Short On-axis Linear Compensation Check -------------------------------------------------- /usr/g/caldir/grad_ecc_coeff.dat : Short term constant values are zero......FAIL No short linear eddy current compensation is applied Author Dave Snastin SME Paul Lyman
Applies to
- Models
- Excite
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.