GE Healthcare · X-ray VascularInnova
fluoro tapers are too low during calibration
Symptom
Fluoro tapers are too low during calibration; Unity 4100:
Applies to
- Models
- Innova
- Product
- X Innova 4100 X Do not use---------4100 systems 4100 systems
- Software
- Innova 4100 M4 (Production) DL5 Ghost 20.1 DL Applications version 3040.20.1 Ghost DL-5 : 20.1 Ghost DL-3 : 18.5 Ghost DL-2 : 18.5 DL : 3040.20.1 DL Atlas Core : 3.1Q RTAC Atlas Core : 3.1Q IDC : 2.8 Calypso : 1.12 Calypso Uptime : 3.3 Positioner : 1.2.20 Jedi : P620
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.