GE Healthcare · MRExcite
After a Severe SPT Failure, PM Check and IBIS do not recognize a Marginal Failure
Symptom
After a Severe SPT Failure, PM Check and IBIS do not recognize a Marginal Failure See Long Description After completion of LV Shim successfully, PM SPT was run and one of the stability subtests failed severely (Body FGRE). The FE repeated the failing subtest in a stand-alone mode (ZOOM) and the subtest was MARGINAL. Running PM Check should have found the subsequent MARGINAL and satisfied the IBIS requirements. Instead it appeared to find the subtest but continued to report "FAIL", therefore not satisfying IBIS. Reference SPR # MRIhc15835.
Applies to
- Models
- Excite
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.0 Only for 1.5T Excite product. 12.0 is Excite HD and 14.0 is Excite HDx. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.