GE Healthcare · MRExciteSigna
No output power from PDU even though 480 V input is applied and Emergency Stop resets okay
Symptom
No output power from PDU even though 480 V input is applied and Emergency Stop resets See Long Description. FE is performing Excite2 to Excite HD upgrade. After the mechanical upgrade was done, FE found that even though the Teal PDU seems to power up okay (the emergency reset even works) there is no output power from any of the output circuit breakers. He measures 480 volts input to the PDU and all phases are present and properly phased. He is using the same PDU as before the upgrade, there was no change.
Applies to
- Models
- Excite, Signa
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.