GE Healthcare · MRExcite5127499
Unable to load LINUX Operating System on Standalone ReportCARD 2.0 workstation
Symptom
Unable to load LINUX Operating System on Standalone ReportCARD 2.0 workstation When following procedure "ReportCARD 2.0 Installation Instructions Excite III 5127499", rev 3, to load software on the ReportCARD 2.0 standalone workstation, on page 17 (section 3.2) the procedure directs that GEHC be entered at the prompt. But after entering this command, the LINUX operating system software doesn't load
Applies to
- Models
- Excite
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.