GE Healthcare · MRExcite30000
"Install_in_spec" Key Generation Fails.
Symptom
"Install_in_spec" Key Generation Fails.
Error message
B0 Image Tool not run in Head Mode Found in install_in_spec.log.bak. see long description. [insite@AMRIMR bin]$ more install_in_spec.log.bak Health Check "Version 1.0" run on Mon Aug 22 18:59:44 CDT 2005 System software revision = 12.0_M4_0520.a Operating System Version = 2.6.7-2.2smp Field Strength = 30000 Governing Body = fda2 Multi Coil = YES RF Amp type = 3.0T Astex RF Amp 35KW Grad Amp Type = HFD Gradients Magnet ramp polarity = pos Maximum Standard Receiver Bandwidth (kHz) = 250.0 Grad Coil type is: TRM SPT Analysis Results -------------------- All SPT Results in Spec! B0 Image Analysis Results ------------------------- Error: B0 Image Tool not run in Head Mode L Coil Analysis Results ----------------------- All L Coil Results in Spec! EPIWP Analysis Results ---------------------- All EPIWP Results in Spec! Coil Configuration Analysis Results ----------------------------------- All Coil Configuration Results in Spec! LV Shim Analysis Results ------------------------ All LV Shim Results in Spec! System Gain Analysis Results ---------------------------- System Gain Results in Spec! Gradcal Analysis Results ------------------------------------- Gradcal tests performed in whole m
Applies to
- Models
- Excite
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.