Will Not Scan with Gradient Errors

Symptom

Error message

2248664 - MDS link failure. An MDS device failed to respond to SCP Mon Feb 2 13:27:26 2004 2248664 1 MR-OC0 NSP SCP:MdsLinkHWO 1395 MDS link failure. An MDS device failed to respond to SCP. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. MDS timer: 0x0025 Transmitted header: 0x10 Gradient Transmitted opcode: 0x02 EN 335

2240234 X Axis Gradient Amplifier Fault. No auxiliary voltage present. 2240234 1GEMS NSP SCP:GradientScaMdsHWO 1201 X Axis Gradient Amplifier Fault. No auxiliary voltage present. The +15V, -15V or +5V power supply voltage is not present. Please check the LED on the Power Supply Unit (PSU), power cable from PSU and amplifier bus data cable to X Gradient Amplifier.

2240247 X Axis Gradient Amplifier Fault. 2240247 1 GEMS NSP SCP:GradientScaMdsHWO 1201 X Axis Gradient Amplifier Fault. IPG received an unknown status 0x13 from the Gradient Subsystem. Verify no errors are reported on the front of the System Control Assembly. Possible causes: MDS link or faulty amplifier bus ribbon cable. EN 344 SR 335

Applies to

Models

Excite

Product

Profile with Excite

Software

Profile5 Applies to Profile5 (Excite) only. Profile5 is 12.x based software, not ProfileHD.

Component

5118227 AN8295Y Analogic Gradient Amplifier Unit 5118227 AN8295Y Analogic Gradient Amplifier Unit 5118227 AN8295Y Analogic Gradient Amplifier Unit

Area

MR

Related GE Healthcare MR issues

• CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
• CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
• CWA How to Change Exam Number from Remote Tools.
• Known Software issue with 15M4B coding error.
• Unable to Send Images to the PACS Due to PACS is down.
• U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.