No Head or Multi Coil Signal and Body Signal is Good after upgrade to Excite HDx
Symptom
No Multi Coil Signal but Body Signal is Good after upgrade to Excite HDx HDX upgrade from 12X HD, body signal is good , but no signal in head or multicoil. MC Bias faults or no surface coil signal after HD (12.0) to HDx (14.0) Upgrade. See Long Description. Subject: MC Bias faults or no surface coil signal after HD (12.0) to HDx (14.0) Upgrade. Effectivity: All 1.5T and 3T EXCITE HDx (14.0) MR systems. Problem: System reports Multicoil Bias Faults after completing HD (12.0) to HDx (14.0) upgrade. Coils attached to the legacy Bendix connector will report multicoil bias open faults. Transmit/receive coils, like the Knee TR coil, connected to Hypertronics connector 'A' will scan without faults but no signal will be seen.
Applies to
- Models
- Excite
- Product
- Excite HDx Includes "Excite HDi" system. 14.0 Software only.
- Software
- 14.0 For both Excite HDx and 3T Excite HDx systems.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.