GE Healthcare · MRExcite2224667
Unable to scan Phased Array coils due to CSB Not Ready message on Profile5.
Symptom
Unable to scan Phased Array coils due to CSB Not Ready Message on Profile5. All other coils will scan without error. No other error messages in the log. Coil ID is correct because the correct coil picture appears on the Save Series screen. The two PA coils used were the Shoulder PA and CTL Array (USAI).
Error message
2224667 Manual Prescan Fails, Coil Switch Bias Not Ready 2224667 Manual Prescan Fails Coil Switch Bias Not Ready is the only message that appears in the GE Sys_log.
Applies to
- Models
- Excite
- Product
- Profile with Excite
- Software
- Profile5 Applies to Profile5 (Excite) only. Profile5 is 12.x based software, not ProfileHD.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.