GE Healthcare · MRExcite
Unable to Passively Shim the Shinetsu Magnet
Symptom
Unable to Passively Shim the Shinetsu Magnet The software correctly calculated the mechanical shim (upper/lower slug adjustments) but provided incorrect passive shim locations. The passive shim locations that were incorrect were for Ring 5 (U5, L5). The new style Shinetsu magnet does not have Ring 5 but the shimming software on the HP computer determined Ring 5 needed shims.
Applies to
- Models
- Excite
- Product
- Profile with Excite
- Software
- Profile5 Applies to Profile5 (Excite) only. Profile5 is 12.x based software, not ProfileHD.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.