GE Healthcare · MR
The Short YY Linear data will not converge into spec during ECMT2 while calibrating a new HFO5
Symptom
The Short YY Linear data will not converge into spec during ECMT2 while calibrating this new HFO5 system. There is seemingly no problem with the Long YY Linear data. The Short YY Linear numbers are in the 100's and the plot is unusual: The line ramps up then it goes all over the place then ramps back down.
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR5-HFO5 Open Speed with Excite Product
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.