GE Healthcare · MR
Unable to Boot Applications Software, getting UPS Communication failures or Ping the TPS
Symptom
Unable to Boot Applications Software, getting UPS Communication failures and Unable to Ping the TPS Getting UPS communication errors displayed in the boot-up messages when Solaris is booting. Application Software boot halts after selecting a mobile location and crashes to a gray screen. Can't ping the TPS from a Terminal Window when logged in as root. Original hosts file is renamed to .OLD on every boot and contains information which does not include IP addresses.
Error message
upsd[362]: ROOT: Cannot open object Error seen either in /var/adm/messages or during Solaris boot up. upsd[362]: UPSTAB: Cannot open object Error seen either in /var/adm/messages or during Solaris boot up. upsd[362]: Cannot open UPS comm. line Error seen either in /var/adm/messages or during Solaris boot up. upsd[362]: UPSMSG: Cannot open object Error seen either in /var/adm/messages or during Solaris boot up.
Applies to
- Product
- Profile 3 Ultrasparc CPU with AN8290Y gradients
- Software
- 7.7x Profile3 through 4, Contour3 through 4
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.