GE Healthcare · MR
Leybold RW4000 Mobile Compressor - 46-294141G1. (Should be used on Mobile MR Trailers ONLY)
Symptom
SecondOpinion Leybold RW4000 Mobile Compressor 46-294141G1. (Should be used on Mobile MR Trailers ONLY) Issue Description: This part has been identified as one requiring second opinion approval before ordering due to one or more of the following reasons. High usage, High NDF, High cost, High demand but low consumption, difficult to isolate. See resolution concept for steps to perform before ordering this part.
Applies to
- Product
- Magnet S3. Software Version Concept should NOT be selected for Magnet Products Serial # (Dxxx) Field strength: 1.5 T LHe Boiloff Rate: Serial # (Dxxx) Field strength: 1.5 T LHe Boiloff Rate:< 0.2 liters/hr He Vessel Pressure:0.25 to 0.5 psig F1 Flow:0.4 to 0.6 SCFH F2 Flow:1.5 to 2.0 SCFH 1st Stage:40 to 58 Kelvin 2nd Stage:7 to 17 Kelvin Min. LHe Fill Level:30% (3 Dewar Fills) Min. LHe Fill Level:50% (2 Dewar Fills) Min. LHe Ramp Level:75% Min. LHe Shim Level:50% Helium Volume:1188 Liters (SIII) Burst Disk (integral gaskets) :2194545-4 Baffle Assy:46-318035G1 Shim Lead:46-260815G1 Shim Lead Large 5/8:46-318096G
- Component
- SecondOpinion Leybold RW4000 Mobile Compressor 46-294141G1. (Should be used on Mobile MR Trailers ONLY) See comments in resolution concept for second opinion requirements before ordering this part
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.