Intermittent Ghosting And Shading On FSE Scans On An OpenSpeed System
Symptom
MRIQ: Intermittent Ghosting And Shading On FSE Scans On An OpenSpeed System see attached file and long description. The system is an OpenSpeed running HFO3 M4 software. The Customer complaint is intermittent shading and ghosting/blurring on FSE scans. See the attached image for an example of what they are seeing. These images are with the HEAD coil. They also had some examples of similar artifacts on spine work with the CTL coil. For troubleshooting ghosting, go to; http://3.87.118.28/optec3/common/8xdocs/epst/mod11/m11_010_000.html
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.