GE Healthcare · MR
Need Burst disc part number for older Magnets VMX,S2-SXC & MRMAX w/ 7/8inchBurst discs requiring 20 psi burst discs
Symptom
Need Part Number for Older Magnets VMX,S2-SXC & MRMAX w/ 7/8inch 20 PSI Burst Discs Need Burst disc part numbers for older Magnets VMX,S2-SXC & MRMAX w/ 7/8inchBurst discs requiring 20 psi burst discs.
Applies to
- Product
- Magnet SX-C1. Software Version Concept should NOT be selected for Magnet Products Serial #(Kxxx) Field strength: 1.0 T LHe Boiloff Rate:
- Component
- 2150415-2 Burst Disk 20 PSI 7/8” with Garlock Gaskets See long description Magnets, which utilize the thick (7/8”) burst disk (P/N 46-252838P4 or 2194545-4) with garlock gaskets on both seal surfaces exhibit leaks. Unless fully compressed with a high torque, the gasket on the magnet (high pressure) side of the disk leaks, resulting in unacceptable helium loss. Several systems exhibited leakage even after full torque application. Corrective action: A new burst disk, P/N 2350415-2 has been designed and tested as an upgrade for the Boil-Off Magnets in the field that have the original burst disc 46-252838P4 (P/N 2194545-4 which includes the garlock gaskets). The new burst disk (P/N 2348045-2) incorporates an o-ring groove in the seating surface of the magnet flange. When ordering the new disk, request the burst disk assembly P/N 2350415-2, which will include the o-ring (magnet side) and garlock gasket (vent side). This new burst disk may be used on all Boil-Off Magnets which require a 20psig burst disk . The 2350415-2 burst disk is a FRU for the original burst disk since upgrade is only required for leaking systems.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.