GE Healthcare · MR
Will Not Print Fails to Contact Camera
Symptom
Will Not Print Fails to Contact Camera Will Not Print Fails to Contact Camera.
Error message
scsi_open: /dev/dasm1 open failed - errno 2 Could not initialize_scsi status = ffffffff prslog: The printer interface was unable to communicate with the filming device. From /export/home/sdc/logfiles/prslog: MESSAGE from Process 2275>> Tue Mar 23 07:14:02 2004 (prsjob.c:425) [PRSserver]> The printer interface was unable to communicate with the filming device. Please check the camera and resume the print job in the Film Queue MESSAGE from Process 2275>> Tue Mar 23 07:14:02 2004 (prsjob.c:427) [PRSserver]>Unable to communicate with camera.
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.