GE Healthcare · MRExciteHiSpeed22491292252318224860222486832244588

31495 Unable to Download or Reset The TPS MGD or ISE

Symptom

No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.

Error message

2249129 SRI Communication Error. A reset was not detected when requested to the SRI.

2252318 The Driver Module Has Detected a Power Supply Fault . Actual Voltage = 50.5 Limit Voltage = 425.0 2252318 The Driver Module Has Detected a Power Supply Fault . Actual Voltage = 50.5 Limit Voltage = 425.0

2248602 PDU in Stop Mode. Emergency Stop button was pressed or PDU 24 Volt supply has failed. 2248602 PDU is in Stop mode. Emergency Stop button was pressed or PDU 24 Volt supply has failed.

2248683 MDS Configuration Failed. MDS link errors caused the configuration to fail. Tue May 25 10:38:44 2004 2248683 MROP NSPSCP:MdsAutoConfig 338 MDS Configuration Failed.MDS link errors caused the configuration to fail. Please fix and perform a TPS Reset.

2244588 The GP is reporting SGA Power Supply Internal Wiring Fault or Internal Power Supply Undervoltage 2244588 "The GP is reporting SGA Power Supply Internal Wiring Fault\n\ or Internal Power Supply Undervoltage. Reseat the internal\n\ SGA-PS connectors. Else, replace the SGA Power Supply." 2244588 "The GP is reporting SGA Power Supply Internal Wiring Fault or Internal Power Supply Undervoltage. Reseat the internal SGA-PS connectors. Else, repl

Applies to

Models
Excite, HiSpeed
Product
Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues