GE Healthcare · MR2238883
Low signal and shading on the bottom of axial body coil images
Symptom
Low Signal and Shading on the Bottom of Axial Body Coil images The system has shaded images and fails body SNR test. Head passes.
Error message
2238883 Analogic RF Amplifier Peak Power Fault 2238883 Host: hfo1 Process: NSP File: HPC_PORT_ID:spi_rf_mon Line: 3068 Analogic RF Amplifier Peak Power Fault. Peak power from Analogic RF Amplifier exceeds specification. Possible causes: RF Interface (RFI) calibration, defective RFI output stage, defective Exciter or defective RF Amplifier
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Component
- 2269627 HFO Bottom RF Body Coil
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.