GE Healthcare · MR
MDC Ground Current is high with MR System powered off.
Symptom
MDC Ground Current is high with MR System powered off. One of the biggest problems with MR systems has been excessive ground current with the system powered off. Excessive ground current is usually anything over 50 mA. Please remember that this current is on the ground wire from the PDU to the MDC with ALL the breakers OFF in the MDC. It is not uncommon to find this ground current to be as high as 1.5 AMPS.
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.