GE Healthcare · X-ray VascularInnova28245
Innova tube chiller connection using OptoBridge The serial cable from the tube chiller to C1 cabinet needs an…
Innova tube chiller connection using OptoBridge
Symptom
Innova tube chiller connection using OptoBridge The serial cable from the tube chiller to C1 cabinet needs an adaptor cable and an "optical bridge" (which looks like a 25 pin adaptor).
Replace short serial cable MIS 28245 and optical bridge to cond
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.