GE Healthcare · MRExcite224865222486532224666

How can an Engineer monitor the Patient Comfort Sensor Reading on Excite 2. 3T Excite G3.

Symptom

How to monitor the Patient Comfort Sensor Reading Need Patient Comfort Sensor File Location To Monitor Patient Comfort Sensor Readings. Good for 11.0 and 12.0 systems.

Error message

2248652 Scan inhibited. Patient comfort sensor trip. See Long Description Mon Apr 5 07:37:02 2004 Error: 2248652 Host: lxmr3 Process: NSP File: SCP:BoreTempSriHWO Line: 999 Scan inhibited. Patient comfort sensor trip. To return to scanning, verify: 1. Patient fan is ON. 2. Scan room temperature is normal. 3. Air flow through the bore is unobstructed. 4. Gradient Cooling fan is normal. 5. BRM heat exchanger is normal. Extended Error: The bore temp that was measured by the SRI has reached the second trip level. Subsequent scans will not be allowed. If the bore temperature is not high, this could indicate a problem with the bore temperature sensor cable or the SRI. Please make sure that the bore temperature sensor cable is connected to the SRI and that it is positioned correctly in the bore. Possible cause(s): Bore Temp Sensor, SRI

2248653 New scans can be initiated, but the patient comfort level is still warmer than normal. 2248653 1 b4a NSP SCP:BoreTempSriHWO 1009 New scans can be initiated, but the patient comfort level is still warmer than normal.

2224666 Auto Prescan failed, Patient comfort temperature sensor trip. Mon Apr 5 07:48:24 2004 Error: 2224666 Host: lxmr3 Process: psc

Applies to

Models
Excite
Product
3T Excite G3 Software ONLY
Software
G3 For 3T Excite only
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues