GE Healthcare · MR60645
TPS Reset Failure Due to Non-Fatal Interprocessor Test Failure. 3T Eclipse
Symptom
Unable to Download or Reset the TPS MGD or ISE Unable to download TPS or ISE or MGD chassis
Error message
Testing CPU-IPG Inter_Processor: Non-Fatal Failure Detected ! After the Install of FMI 60645 (3T Eclipse Exciter Upgrade), TPS Will Not Download. The errors shown below are logged into the message log on any reset attempt. The Bit3 network is working fine. When viewing the output of the TPS-CPU via the "Debug" connection (Run 818), using the command "cu tps", the following error message is posted during the power-up test: Testing CPU-IPG Inter_Processor: Non-Fatal Failure Detected !
Applies to
- Product
- 3T Eclipse For E2 software
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.