GE Healthcare · MRExcite
When the table home or fast out buttons are pressed, the cradle moves 5-7mm towards the home direction immediately and t…
When the table home or fast out buttons are pressed, the cradle moves 5-7mm towards the home direction immediately and then travels into the bore and stops at the mechanical stop at the end of the tab…
Symptom
The Cradle moves 5-7mm towards Home then travels into the Bore and stops at the End-of-travel. When the table home or fast out buttons are pressed, the cradle moves 5-7mm towards the home direction immediately and then travels into the bore and stops at the mechanical stop at the end of the table
Applies to
- Models
- Excite
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.0 Only for 1.5T Excite product. 12.0 is Excite HD and 14.0 is Excite HDx. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.