GE Healthcare · X-ray VascularInnova1070353
No table longitudinal motion:Innova X100 Monoplane:IQ+ or PRO table, Replace the Longitudinal Servo Node
Symptom
IQ+ or PRO Table : No table longitudinal motion IQ+ or PRO Table : No table longitudinal motion. See long description for further details. Table cannot move on longitudinal axis. Other axis are good : Lateral, Lift and Tilt. Table recalibration does not help. The only way to unlock longitudinal motion is to press the 2 push buttons on DC-DC board and keep them pressed. In this case, longitudinal brakes are released thus allowing to manually move the table top. The motorized motion still does not work.
Error message
1070353 Hall sensor error for Longitudinal axis - ELEGANCE Code 0x14e9 ,1070353 Hall sensor error for Longitudinal axis - ELEGANCE Code 0x14e9 1070353 Hall sensor error for Longitudinal axis - ELEGANCE Code 0x14e9
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.