There is a time difference of one hour between the CA1000 "Study time" and the Innova x100 "Acquisition time"
Symptom
There is a time difference of one hour between the CA1000 "Study time" and the Innova x100 "Acquisition time" There is a time difference of one hour between the CA1000 "Study time" and the Innova x100 "Acquisition time". The time of the study start shown on the CA1000 from the DICOM header is 1 hour earlier than actual study start on Innova. It shows up on the CA1000 because it looks for study start time. The AW looks at sequence start time and therefore doesn't have this problem. The study start time in the DICOM header coming from the Innova appears to be incorrect (1 hour earlier).
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 CA, AI1000, AW-# workstation CA, AI1000 or AW workstation Use CA, AI1000 or AW# at the begining of concept CA1000 or AW workstation Use CA1000 or AW# at the begining of concept
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.