No gantry motion is reported by the customer.
Symptom
Gantry motion does not work from Smart Box From the smart box, the Pivot, Carc, and II motions are not working. Table up/down and Larm motions are functional using the smart box. II motion is working using II switch ring buttons. AP / LAT auto pos from TSSC is functional. Gantry motion does not work from Smart Box From the smart box, the Pivot, Carc, and II motions are not working. Table up/down and Larm motions are functional using the smart box. II motion is working using II switch ring buttons. AP / LAT auto pos from TSSC is functional.
Applies to
- Models
- Advantx, Innova
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.