Advantx 4A66 POWER INJECTOR ERROR Injector did not inject as programmed.

Symptom

Error message

Advantx 4A66 Injector did not inject as programmed. A timer is set for a delayed injection Advantx 4A66 Injector did not inject as programmed. The injector does not appear to be injecting after being commanded to. A timer is set for a delayed injection and after the delay the injector INJECTING signal is checked to see if the injection is actually occurring. The error is reported if it is not.

Applies to

Models

Innova, Advantx

Product

Innova 2000 Innova 2000 systems Innova 2000 systems Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Advantx, LFX Advantx product line LFX Advantx product line Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane)

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.