GE Healthcare · X-ray VascularInnova1200105
Detector temperature or flow error
Symptom
Detector temperature or flow error
Error message
error Code = 1200105, error Text = Err_Detector Temperature, debug Text += Temperature out of range XX.XX degrees, recovery Class = WR, major Function /= XRImDet System impact: Message displayed to the customer. Displayed message : "Detector out of temperature range. If problem persists, call Service". See long description for further details. System impact: Message displayed to the customer. Displayed message : "Detector out of temperature range. If problem persists, call Service". Two cases can occur; either temperature above USL (Upper spec limit) or temperature below LSL (lower spec limit). Currently : USL = 35° C, LSL = 25° C. If measured detector temperature is outside this range, then an error 1200105 is generated.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Detector conditioner 5131740 SMC detector conditioner Detector conditioner Current rev is -15 but a -7 through -15 is acceptable. Detector Conditioner, connecter kit 2379172 5131740 SMC detector conditioner Detector conditioner Current rev is -15 but a -7 through -15 is acceptable. Detector Conditioner, connecter kit 2379172
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.