GE Healthcare · X-ray VascularAdvantxInnova
System ON/OFF Switch MPPU2A1A2 CB10 will not turn ON
Symptom
System ON/OFF Switch MPPU2A1A2 CB10 will not turn ON System ON/OFF Switch MPPU2A1A2 CB10 will not turn ON. "480 Feeder On" L3 is ON and "Line ON" L1 is on but L2 - "System ON" does not come on after resetting the CB10 breaker.
Applies to
- Models
- Advantx, Innova
- Product
- Advantx, LFX Advantx product line LFX Advantx product line Innova 2000 Innova 2000 systems Innova 2000 systems Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane)
- Component
- Advantx-E VAMP Advantx-E VAMP Advantx-E VAMP
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.