GE Healthcare · MR
Daily QA failed due to top cover on magnet SpecialtymR 1.5T Extreme MSK AA5000 SpecialtyMR 2.51
Symptom
Daily QA Failed The Daily QA should be run every day using the 180mm coil with the Daily QA 1 liter bottle.
Error message
The Daily QA test failed. Please check for proper phantom positioning and proper system setup and run again. If the problem cannot be corrected, contact Service and report the error. Further clinical scanning is not recommended until the error condition is corrected.
Applies to
- Product
- SpecialtyMR 1.5T Extreme MSK AA5000 For use only with 2.51 or 3.53 Software versions
- Software
- SpecialtyMR 2.51 For use only with 1.5T Extreme MSK AA5000 SpecialtyMR Product
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.