Cannot scan with DCERD errors.

Symptom

Error message

2248847 The RF Amp in waiting condition for too long See Long Description for Extended Error message 2248847 NSP SCP:Srfd3RfNbCanHWO 1971 Exception Class: Unknown Severity: Unknown Function: Software/Firmware/Config: N/A PSD: Spin Echo Coil: HEAD Scan: 2710/6 RF Amplifier Error. The RF Amp in waiting condition for too long. The RF Amp indicated it was waiting for 46 seconds. Please power cycle the RF Subsystem and perform a TPS Reset.-> Extended Error: Communication with the RF Amplifier indicated it was waiting. The condition persisted for too long, %d seconds. This could result from a problem with the RF Amp. Verify that CAN Communication, SCP board, and RF Amp are configured correctly and perform a TPS Reset.

2264862 The fiber link between the DCERD and MGD chassis is not in a ready state 2264862 Host: hd01 Process: diagCoord File: Irf.cpp Line: 290 Task ID: 0x7effdf0 Time: 1835 Object: APS Exception Class: Unknown Function: RF: RF Transmit RRF FIBER CABLE LINK NOT READY The fiber link between the DCERD and MGD chassis is not in a ready state after hardware initialization. This will prevent the MGD from controlling the DCERD chassis. Try TPS reset. Run DCERD diagnostics.

Applies to

Models

Excite, Signa

Product

Excite HDe. For Hino HDe 14.0 and HDe 15.0 Software Systems only

Software

HDe 15.0 For Hino Excite HDe 15.0 systems only.

Component

5141010 Power Supply for ASC and DCERD

Area

MR

Related GE Healthcare MR issues

• CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
• CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
• CWA How to Change Exam Number from Remote Tools.
• Known Software issue with 15M4B coding error.
• Unable to Send Images to the PACS Due to PACS is down.
• U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.