GE Healthcare · X-ray VascularInnova
Gantry axis calibration failure in PST
Symptom
INX1PRO-IQ+: Gantry axis calibration failure in PST INX1PRO-IQ+: Gantry axis calibration failure in PST. Start PST, calibration axes screen. Start Pivot axis calibration. When accepting the second calibration point, a "Calibration failure" message is displayed, asking to reposition the axis and redo the calibration. The problem is repeatable. Can also happen with any other axis (i.e C-arc or detector lift. L-arm too but with lower probability).
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.